Kverneland Exacta-TL-GEOSPREAD GS3 Скачать руководство пользователя

Страница: 135 / 171

Maintenance

135

Torques in ft.lb

Guidelines for torques (in ft.lb) for self-locking nuts, hexagon bolts and
nuts.

The friction coefficient of 0.10 applies to oiled sheets, cast iron,

hardened surfaces, greased threads, etc. The higher value of 0.13
applies to dry sheets.

Torques for bolts and nuts with serrated lower edges 10% extra, such
as:

•

Tensilock (K100)

•

Whizlock.

Exceptions to this table are listed in the parts and/or instruction
manual.

Checking bolts and nuts



Check all bolt and nut connections:



Turn all nut and bolt connections up to the point as given in the
chart above:

•

after the first operating hour.

•

regularly (at least weekly).

Torques

Quality

4.6

8.8

10.9

12.9

Friction

0.10

0.13

0.10

0.13

0.10

0.13

0.10

0.13

Thread

1.3

1.5

3.7

4.4

5.2

5.9

6.6

7.4

2.2

3.0

6.6

7.4

9.6

11.1

13.3

5.9

6.6

15.5

18.5

22.9

26.6

M10

11.8

14.0

29.5

36.9

44.3

51.7

62.7

M12

19.9

23.6

51.7

62.7

77.5

88.6

107.0

M14

31.0

36.9

84.9

99.6

121.8

143.9

169.7

M16

48.0

56.1

129.2

155.0

191.9

221.4

258.3

M18

66.4

81.2

184.5

214.0

258.3

310.0

302.6

361.6

M20

92.3

110.7

258.3

310.0

369.0

442.8

428.0

516.6

M22

125.5

147.6

346.9

413.3

494.5

590.4

575.6

686.3

M24

155.0

184.5

442.8

524.0

634.7

752.8

738.0

870.8

WARNING

Nuts and bolts could become loose through vibrations. Check the
nuts and bolts regularly to prevent damage to the machine and
possible injury, especially after maintenance.

Содержание Exacta-TL-GEOSPREAD GS3












































































































































































Результаты поиска

Содержание Exacta-TL-GEOSPREAD GS3

Отзывы:

Похожие инструкции для Exacta-TL-GEOSPREAD GS3

Бренды по названию

Популярные бренды

Kverneland Exacta-TL-GEOSPREAD GS3, Руководство оператора

Результаты поиска

Содержание Exacta-TL-GEOSPREAD GS3

Отзывы:

Похожие инструкции для Exacta-TL-GEOSPREAD GS3

Бренды по названию

Популярные бренды