Maintenance
148
Replacing agitator
axle seal
The agitator axle is equipped with a plastic seal to prevent fertilizer
granule loss along the agitator axle. The seal must be replaced every
season, as well as after every 100 hours of operational hours. Only
work on a clean machine with an empty hopper.
Set the fine application lever to the normal dosing setting.
Start the tractor and engage the control box.
Press the key switch in the main screen to go to the ‘Curve
Calibration’ screen.
Press the empty hopper key to go to the screen for emptying the
hopper.
Press the 'empty hopper' button in order to empty the hopper on
both sides simultaneously.
Press the OK key to start emptying the hopper. Both actuators now
open to their maximum.
Wait until both actuators are completely extended and the dosing
units are completely open.
Place the machine on the ground or on firm supports on a firm,
level ground.
Switch the electronic control system and the tractor off, remove the
key from the ignition and engage the parking brake of the tractor.
\
WARNING
Avoid contact with the fertilizer and other material
You will most likely get into contact with the fertilizer and other
material you may wish to spread while filling, adjusting and testing
the spreader. Wear protective clothing and safety gloves, read the
safety instructions provided by the supplier and follow their
directions. Contact with these materials could cause physical
harm.
Be careful that nothing gets jammed
It is easy for parts to get jammed while adjusting and checking the
spreader.
Work safely while checking and adjusting:
•
place the tractor and machine on a firm, flat surface,
•
switch off the PTO shaft,
•
switch off the electronic control system,
•
release the pressure from the hydraulic system,
•
place all controls in their neutral or park position,
•
switch off the tractor,
•
remove the key from the ignition,
•
engage the parking brake of the tractor,
•
wait for all machine parts to come to a standstill before you
start with the adjustments,
•
wear protective clothing, such as safety gloves and shoes,
•
carefully follow the instructions given.
Friction with these materials could cause physical injury.
Содержание Exacta-TL-GEOSPREAD GS3
Страница 6: ...Preface 6 ...
Страница 166: ...Notes 166 Notes ...