Kverneland Exacta-TL-GEOSPREAD GS3, Руководство оператора

Страница: 100 / 171

Use in the field
100
I
NDICATION
Most types of fertilizer attract water and can thereby form large
chunks. These chunks can block the spreader or distort the spreading
pattern.
•
When working under moist weather conditions, use a hopper cover
that closes well.
•
Do not spread without a hopper cover under moist conditions.
•
Never leave the fertilizer for a long period of time in the spreader.
Chunks can also be formed through moisture in the air.
•
Always clean the spreader well after use, including the dosing
openings and the discharge bushings.
Adjusting the machine
Before you can make the first pass, you must make adjustments in the
field to:
Spreading height
The following is important to ensure that the spreader works properly:
•
set it to the correct height from the ground or above the crop and
•
by levelling it with the lift rod adjustment and top link.
Measured from the bottom of the vanes, the distance to the ground or
the crop must be 75 cm/29.5 in.

Use the power lift to lift the machine to the correct height.

Set the spreader horizontally with the lift rod adjustment and the
top link.

Lock the lift limiter in this position.
Height correction with top dressing
If the required height of 75 cm/29.5 in above the crop is not possible
with your power lift

use the high spreading setting of the linkage pins and/or

set the spreader forward.

See paragraph »Selecting linkage pin height« on page 54.
75 cm/29.5 in
Ground level or the top level of the crops