Kverneland Exacta-TL-GEOSPREAD GS3, Руководство оператора

Страница: 102 / 171

Use in the field
102
Spreading on field
Working with the GEOCONTROL
Starting a new task is done from a saved field or one to be created
newly with the GEOCONTROL application.

Refer to the GEOCONTROL manual in your terminal for this
purpose.
Spreading the headland
A broad headland is desirable in order to make the connection to the
headland before turning in from the pass. The headland will act as the
field boundary and is saved in GEOCONTROL.
A broad headland is desirable in order to make the connection to the
headland before turning in from the pass.

Spread a broad or double headland so that you make the
connection while driving straight before making a turn.
Filling passes
Thereafter, the field can be filled in full passes. You can create a
(spray)track pattern for following processes.
Set tramlines
Prevent drive errors
It is important that the spreading patterns overlap well to ensure good
distribution. A difference in the overlapping is less vital with average
working widths, using a triangular spreading pattern.
Differences in the spreading pattern would easily be noticed with a
trapezium shape on very large working widths, in particular. The
overlap of the spreading pattern is then much smaller and therefore
more sensitive to mistakes.
This can be prevented by setting tramlines before hand. This can be
done by setting out tramlines on the headlands and marking them
with:
•
sticks with empty bags,
•
pickets,
•
special display boards.
Visibility of the from headland to headland is very important. Place
additional markers in the field if necessary to ensure that the track is
clearly visible.
The GEOSPREADer has the option of reducing the working width in
order to connect the incomplete final pass with the next one, when
controlled by the GEOCONTROL.