Kverneland Exacta-TL-GEOSPREAD GS3, Руководство оператора

Страница: 80 / 171

To be done before spreading
80
Test the left and right
spreading patterns
The left and right spreading discs must spread the same volumes of
fertilizer to ensure good distribution. Check this every year!
I
NDICATION
This test describes a working width of 59 ft. You are of course free to
run the test for a different working width. Divide the buckets at equal
distances along the working width.
Operation

Switch the tractor off, remove the key from the ignition and engage
the parking brake of the tractor.

Disconnect the left spreading disc by sliding the connector to he
left. Secure the connector with a lock clip.

Search the correct discharge position to spread over 59 ft. in the
best comparable fertilizer, seeds or granules spreading chart and
set the handle accordingly.

See paragraph »Discharge point« on page 67 and the foreword
of the spreading chart book.

Fit the coupling shaft to the correct attachment point of the central
gearbox as indicated in the associated spreading chart.

See paragraph »Coupling shaft connection point« on page 66.

Check the height of the spreader (height of the spreading disc =
75 cm/29.5 in above the troughs) .

Place the grids in the troughs.

Place trough 1 in the middle of the tractor tracks.

Place the other troughs 10 ft. to the right of the tractor tracks.
I
NDICATION
Position the troughs horizontally with a spirit level!
Connector