Kverneland Exacta-TL-GEOSPREAD GS3, Руководство оператора

Страница: 99 / 171

Use in the field
99
Use in the field
\
WARNING
Friction between moving parts:
Be careful of moving parts making contact with each other while
working. You could accidentally touch control levers and cause the
machine to move.
Only start working once all machine parts have stopped and the
control lever have been secured. Wear safety shoes and gloves
and work alone. If something gets jammed it could lead to per-
sonal injury.
Check the direct surroundings
Check the immediate environment and keep a constant eye on it
at the start, as well as while you are working with the machine.
Familiarize yourself with the immediate vicinity. Do not start
working until all people and obstacles within the working area and
danger zone of the tractor and machine have been removed.
Never stay or allow anyone to stay within the danger area while
the machine is running! If there are people within the working area
and the danger zone it could lead to injury.
Before leaving the tractor:
•
place the tractor and machine on a firm , flat surface,
•
switching off the PTO shaft,
•
switch off the electronic control system,
•
release the pressure from the hydraulic system,
•
place all controls in their neutral or park position,
•
switch off the tractor,
•
remove the key from the ignition,
•
engage the parking brake of the tractor.
That way you make sure that the tractor cannot be started when
you are working on the machine and that the machine cannot
move, which could cause severe physical injury.
PTO shaft rotates after disengaging
After switching off the PTO shaft, danger could arise as the
machine will continue running because of inertia. Keep a safe
distance to the machine until the moving parts have come to a
complete stop. Approaching the machine while it is rotating can
cause serious or deadly injuries.
Protecting the environment
Spreading a too high dose of materials outside of the field edge,
especially on water surface, creates a heavy burden on the
environment. Protect the environment by applying a correct
application rate in a correct working manner.
Work with a closed cabin
Fertilizer dust can blow indoors through open windows, doors or
other openings. Moreover, the sound level is higher in an open
cabin. It is therefore recommended to always work with a closed
cabin with active carbon filters in the air inlets. Fertilizer dust and
a high sound level can cause physical damage.