Kverneland Exacta-TL-GEOSPREAD GS3, Руководство оператора

Страница: 141 / 171

Maintenance
141
Checking and setting the
dosing mechanism
Check the settings of the dosing mechanism:
•
after the first 10 running hours,
•
for each season,
•
after every 100 operational hours,
•
if the spreading pattern between the left and right spreading discs
differs more than 3%.

See paragraph »Test the left and right spreading patterns« on
page 80.
\
WARNING
Avoid contact with the fertilizer and other material
You will most likely get into contact with the fertilizer and other
material you may wish to spread while filling, adjusting and testing
the spreader. Wear protective clothing and safety gloves, read the
safety instructions provided by the supplier and follow their
directions. Contact with these materials could lead to personal
injury.
Be careful that nothing gets jammed
It is easy for parts to get jammed while adjusting and checking the
spreader.
Work safely while checking and adjusting:
•
place the tractor and machine on a firm, flat surface,
•
switch off the PTO shaft,
•
switch off the electronic control system,
•
release the pressure from the hydraulic system,
•
place all controls in their neutral or park position,
•
switch off the tractor,
•
remove the key from the ignition,
•
engage the parking brake of the tractor,
•
wait for all machine parts to come to a standstill before you
start with the adjustments,
•
wear protective clothing, such as safety gloves and shoes,
•
carefully follow the instructions given.
Friction with these materials could cause physical injury.