manualshive.com logo in svg

Krone BiG Pack 870 HDP XC, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone BiG Pack 870 HDP XC Скачать руководство пользователя страница 75

Start-up

8

Connecting the hydraulic hoses

8.3

BiG Pack 870 HDP XC

Original Operating Instructions 150000760_00_en

75

8.3

Connecting the hydraulic hoses

BP000-097

„

Relieve all pressure from the tractor hydraulics.

„

Shut down and safeguard the machine, 

refer to page 25

.

„

Clean and dry the connections of the quick couplings.

For “Comfort 1.0” version

Tractor with Load Sensing pump and message line:

ü

The system screw of hydraulic system is completely screwed in, 

refer to page 69

.

„

Connect the hydraulic hose (

) with the Load Sensing connection of the tractor.

„

Connect the hydraulic hose (

) with the connection for the depressurised return.

„

Connect hydraulic hose (

) with the connection for the Load Sensing control.

Tractor with constant pressure pump:

ü

The system screw of the hydraulic system is completely screwed in, 

refer to page 69

.

„

Connect hydraulic hose (

) with the tractor.

„

Connect the hydraulic hose (

) with the connection for the depressurised return.

„

Place the hydraulic hose (

) in the holder on the machine.

INFORMATION

Alternatively, the hydraulic hoses (P/T) can be connected to a double-acting control unit.

Содержание BiG Pack 870 HDP XC



























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды