Krone BiG Pack 870 HDP XC, Оригинальная инструкция по эксплуатации

Страница: 289 / 410

Malfunction, cause and remedy 22
Malfunction in the electrics/electronics 22.1
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en 289
Possible cause Remedy
FMI 1: The lower limit value was far below the required one.
On the upper twine, the min-
imum twine length has not
been reached when trying to
tie a knot. „
Check the knotter and the knotter triggering.
„
Have the sensor adjusted.
522027-
3
Upper twine 3
Possible cause Remedy
FMI 1: The lower limit value was far below the required one.
On the upper twine, the min-
imum twine length has not
been reached when trying to
tie a knot. „ Check the knotter and the knotter triggering.
„
Have the sensor adjusted.
522028-
4
Upper twine 4
Possible cause Remedy
FMI 1: The lower limit value was far below the required one.
On the upper twine, the min-
imum twine length has not
been reached when trying to
tie a knot. „ Check the knotter and the knotter triggering.
„
Have the sensor adjusted.
522029-
5
Upper twine 5
Possible cause Remedy
FMI 1: The lower limit value was far below the required one.
On the upper twine, the min-
imum twine length has not
been reached when trying to
tie a knot. „ Check the knotter and the knotter triggering.
„
Have the sensor adjusted.
522033-
1
Upper twine 1
Possible cause Remedy
FMI 0: The upper limit value was greatly exceeded.
On the upper twine, the max-
imum twine length has been
exceeded when trying to tie a
knot. „
Check the knotter and the knotter triggering.
„
Have the sensor adjusted.
522034-
2
Upper twine 2
Possible cause Remedy
FMI 0: The upper limit value was greatly exceeded.
On the upper twine, the max-
imum twine length has been
exceeded when trying to tie a
knot.
„
Check the knotter and the knotter triggering.
„ Have the sensor adjusted.