Machine description
4
Functional description
4.8
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en
49
Right-hand machine side
BP000-067
The large-square baler is equipped with twine boxes on both machine sides. Each twine box is
capable of holding 16 twine rolls. Of these, the twine rolls identified with an “R” are spare rolls.
Left-hand machine side
The 3 upper twines come from the 6 twine rolls (1) in the front.
The 3 lower twines come from the 9 twine rolls (2) in the rear.
Right-hand machine side
The 2 upper twines come from the 4 twine rolls (1) in the front.
The 2 lower twines come from the 8 twine rolls (2) in the rear.
During the baling process, each of the 5 knotters is fed with an upper twine and a lower twine.
The 5 knotters are numbered from left to right. From the left twine box, 3 upper twines and three
3 twines are fed to the knotters (1, 2, 3). One upper twine and one lower twine is fed to each of
the knotters (1, 2, 3).
From the right twine box, 2 upper twines and 2 lower twines are fed to the knotters (4, 5). One
upper twine and one lower twine is fed to each of the knotters (4, 5).
The lower twine is provided with more twine rolls since it needs more twine for reaching around
the underside and both ends of the big bale. In contrast to that, the upper twine only reaches
around the upper side of the big bale.
In order to ensure sufficient tying safety, make certain that only synthetic twines with a
running length of 100 – 130 m/kg are used.
Only use KRONE original twine.
Electrical twine empty display for lower twine
BP000-068
