Krone BiG Pack 870 HDP XC, Оригинальная инструкция по эксплуатации

Страница: 211 / 410

Settings 15
Setting the double knotter 15.17
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en 211
15.17.1 Blocking/initiating function “tying process”
I
2 1
I
II II
2
BP000-107
In order to avoid unintentional triggering of the tying process during maintenance, adjustment
and repair work at the knotter, the lever for initiating the tying process must be locked.
ü
The machine is shut down and safeguarded, refer to page 25 .
Blocking function “tying process”
„
In order to block the function “tying process”, move the safety lever (2) from position (I) to
position (II) and set it down on the journal (1).
Initiating function “tying process”
„ In order to initiate the tying process, move the safety lever (2) from position (II) to position
(I).
15.17.2 Setting the billhook
BPG000-038
ü
The machine is shut down and safeguarded, refer to page 25 .
ü The knotter shaft is secured refer to page 92 .
The billhook tongue (1) of the knotter hook (4) is tensioned by the closer (3).
If the clamping effect on the knotter tongue (1) is excessive, the knot will be left hanging in the
knotter tongue. The twine tears off.
If there is not enough clamping effect, either no knot or a loose knot will form.
Increasing clamping effect
„ Tighten the nut (2) by approx. 30°.