Krone BiG Pack 870 HDP XC, Оригинальная инструкция по эксплуатации

Страница: 129 / 410

Terminal – machine functions [Medium 1.0/Comfort 1.0] 12
Displays on the working screen 12.3
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en 129
Icon Designation Explanation
Current layer thickness • In cm or inch (depending on selected
system of units).
Direction display • The arrows (left/right) indicate to the
driver the side he/she should correct
towards and by how much when driving
over the swath to ensure that the bale
chamber is evenly filled.
• Up to 3 arrows can be displayed.
• 1 arrow: Low change in direction
required.
• 3 flashing arrows: Greater change in
direction required.
• The direction display can be set, refer to
page 155
94 / 240 cm Bale length display • The black value and the bar indicate the
current bale length.
• The blue value and the red mark
indicate the set target bale length.
• The blue value is touch-sensitive.
Icon Designation Explanation
Bale channel flap pressure
in bar or PSI (depending
on selected system of
units) In manual mode
• The black value under the bar display
and the bar indicate the current bale
channel flap pressure.
• The blue value under the bar display
and the red mark indicate the set target
bale channel flap pressure.
• The blue value is touch-sensitive.
Force of pressure as % In automatic mode
• Display for the baling force on the right
and left in the bale channel.
• The black value under the bar display
and the bar indicate the current baling
force.
• The blue value under the bar display
and the red mark indicate the set target
baling force.
• The display may fluctuate considerably.
The control only functions when the
packer is supplying crops to the piston.
• The bale channel flap pressure is
automatically set by the system based
on the measured plunger force.
• The blue value is touch-sensitive.