manualshive.com logo in svg

Krone BiG Pack 870 HDP XC, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone BiG Pack 870 HDP XC Скачать руководство пользователя страница 106

9

Operation

9.13

Operating the bale ejector

106

BiG Pack 870 HDP XC

Original Operating Instructions 150000760_00_en

Moving bale ejector backwards

„

With the safety sleeve (4) tightened, move the lever (5) to position (II) and hold it until the
bale ejector has moved backwards.

„

When the big bale has been ejected, move the bale ejector back to the front.

„

Close the stop cocks (2) and (3).

Moving bale ejector forwards

„

With the safety sleeve (4) tightened, move the lever (5) upwards to position (I) and hold it
until the bale ejector has moved completely to the very front.

„

Move the bale ejector backwards/forwards until the bale channel is empty.

„

Close the stop cocks (2) and (3).

For “Comfort 1.0” version

Via terminal

BP000-137

ü

The bale chute is lowered, 

refer to page 103

.

„

Switch off the PTO shaft and wait until trailing machine parts have come to a complete stop.

„

Secure tractor against rolling away.

„

Apply the parking brake  (

refer to page 109

) and the flywheel brake (

refer to page 89

) of the

machine.

„

Without “Load Sensing” version:

 Actuate the control unit (

).

The key 

 has several functions.

If baling flaps have not been released

„

Press 

 in order to release the baling flaps.

Содержание BiG Pack 870 HDP XC



























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды