Safety
2
Safety labels on the machine
2.5
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en
27
2.4.4
Running actuator test
WARNING
Run actuator test safely
When actuators are energised, functions are carried out directly and without a safety prompt.
This may cause the unintentional movement of machine parts, trapping and seriously or
fatally injuring persons.
ü
Only persons familiar with the machine are permitted to perform the actuator test.
ü
The person performing the test must know which machine parts are activated by
controlling the actuators.
Run the actuator test safely.
To run the actuator test safely:
Lower raised machine parts or secure them against falling,
Shut down and secure the machine,
.
Cordon off the danger zone of the actuated moving machine parts in a clearly visible
manner.
Ensure that there is nobody in the danger zone of the actuated moving machine parts.
Switch on the ignition.
The actuator test must only be performed from a safe position outside the area that is
affected by machine parts moved by the actuators.
2.5
Safety labels on the machine
INFORMATION
Each safety label is provided with an order number and can be ordered directly from the
manufacturer or from the authorized specialist dealer. The address can be found on the
front cover page.
When attaching safety labels, the contact area on the machine must be clean and free of
dirt, oil and grease so that optimum adhesion of labels is ensured.
