Krone BiG Pack 870 HDP XC, Оригинальная инструкция по эксплуатации

Страница: 264 / 410

19 Maintenance - Gearbox
19.2 Packer gearbox
264
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en
Changing oil
ü
A suitable container is available for escaping oil.
„ Unscrew the locking screw of the oil filling hole (1).
„
Unscrew the drain plug (3) and drain the oil.
„
Mount the drain plug (3), tightening torque refer to page 240 .
„ Top up new oil via the oil filling hole (1) until the middle of the viewing glass (2) is reached.
„
Screw in the locking screw of the oil filling hole (1) and tighten it firmly, tightening torques
refer to page 240 .
19.2 Packer gearbox
INFORMATION
The oil level must be checked and changed with the machine in horizontal position. Use the
lower edges of the cross-members as a reference edge.
BP000-255
„ Observe the safety routine “Safely performing oil level check, oil change and filter element
change”,
refer to page 26 .
Checking oil level
„
Unscrew the locking screw of the inspection hole (1).
ð
The oil level must reach up to the inspection hole (1).
If the oil reaches the inspection hole (1):
„
Mount the locking screw of the inspection hole (1), tightening torque refer to page 240 .
If the oil does not reach the inspection hole (1):
„ Top up new oil via inspection hole (1) until the inspection hole (1) is reached.
„
Mount the locking screw of the inspection hole (1), tightening torque refer to page 240 .
Changing oil
ü A suitable container is available for escaping oil.
„
Unscrew the locking screw of the inspection hole (1) and the drain plug (2) and drain the oil.
„ Mount the drain plug (2), tightening torque refer to page 240 .
„
Top up new oil via inspection hole (1) up to the inspection hole (1).
„ Mount the locking screw of the inspection hole (1), tightening torque refer to page 240 .