Krone BiG Pack 870 HDP XC, Оригинальная инструкция по эксплуатации

Страница: 215 / 410

Settings 15
Setting the plunger 15.18
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en 215
BPG000-042
• The bale channel chamber is equipped with 2 counterblades.
• The plunger (1) is equipped with 6 blades.
ü
The machine is shut down and safeguarded, refer to page 25 .
„
Release flywheel brake, refer to page 89 .
„
Turn the flywheel manually in working direction until the blades (2) are positioned above the
counterblade (3),
refer to page 111 .
„ Apply flywheel brake refer to page 89 .
„
Check the dimension X between blade (2) and counterblade (3).
Æ
If the dimension is X=2-4 mm , the setting is correct.
Æ
If the dimension is not X=2-4mm , spacer washers must be added or removed.
„
Release flywheel brake, refer to page 89 .
„ Turn the flywheel manually in working direction until the blades (2) are freely accessible,
refer to page 111 .
„
Apply flywheel brake refer to page 89 .
„ Unscrew the front sheets (5).
„
Loosen the screws on the blade (2) and add or remove spacer washers (4) until the
dimension is
X=2–4 mm .
„
Tighten the screws on the blade.
„
Screw on the front sheets (5).
„ Release flywheel brake, refer to page 89 .
„
Turn the flywheel manually in working direction until the blades (2) are positioned above the
counterblade (3),
refer to page 111 .
„
Apply flywheel brake refer to page 89 .
„
Check the dimension X between blades and counterblade.
Æ If the dimension is X=2-4 mm , the setting is correct.
Æ
If the dimension is not X=2-4mm , the procedure must be repeated.