Maintenance - General information
16
Checking/changing blades
16.3
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en
241
Thread
Locking screw and viewing glass with
copper ring*
)
Ventilation/breather filter made of
steel
Bleed valve made of brass
Ventilation and breather filter made of
brass
Steel and cast
Aluminium
Steel and cast
Aluminium
Maximum tightening torque (Nm) (±10 %)
M10x1
8
M12 x 1.5
14
G1/4“
14
M14 x 1.5
16
M16 x 1.5
45
40
24
24
M18 x 1.5
50
45
30
30
M20 x 1.5
32
G1/2“
32
M22X1.5
35
M24x1.5
60
G3/4“
60
M33x2
80
G1“
80
M42x1.5
100
G1 1/4“
100
*) Always replace copper rings
16.3
Checking/changing blades
The blades must be changed identically on both right and left machine side. The procedure
used on the left side of the machine is described below. The same applies for the right side of
the machine.
NOTICE
Damages to the machine when raising the blade cassette
The machine will be damaged if blades cassettes are raised when they are not inserted and
locked.
Ensure that both blade cassettes are properly pushed in and locked before the blade
cassettes are raised.
