KROHNE optiplex 1300 c, Руководство пользователя

Страница: 73 / 95

Handbook OPTIFLEX 1300 C
73 OPTIFLEX 1300 C
List of possible errors
The two types of errors are logged
1. Fatal (F): the measured value is not correct.
2. Warning (W): if the problem persists the measured value will no longer be correct.
Error Message Type of
Error
Fault Action
Measurement
status
Level measurement
lost
W The device can no longer find
the product surface
Check the tank contents using another
(visual?) method. If the tank is empty, in
other words below the probe end, then
fill the tank until product level is in the
measurement range. If the tank is full,
that is to say within the blocking
distance, then empty tank until the level
is back in the measuring range. If the
product was lost and the tank is neither
full nor empty, wait for the device to find
the level again.
Level measurement
high F The product level is in the
device's set blocking distance
or outside the measurement
range. The measurement is
either not correct or frozen.
Danger of overflow! Empty tank contents
to a safe level.
Level measurement
low
W The product is below the
probe (and counterweight)
and/or outside the
measurement range. The
measurement is either not
correct or frozen.
Fill tank to at least the bottom of the
measuring range to continue
measurement.
Interface
measurement lost*
W The device can no longer find
the interface
Check the tank contents using another
(visual?) method. If the interface is too
low (below the probe end), then fill the
tank with interface product until it is in
the set measurement range. If the
interface too high, that is to say within
the blocking distance, then empty tank
until the interface is back in the
measuring range. If interface is neither
high or low then an emulsion may exist.
Wait for the device to find the interface
again.
Interface
measurement high*
F The interface is in the
device's set blocking distance
or outside the measurement
range. The measurement is
either not correct or frozen.
Danger of overflow! Empty tank contents
to a safe level.
Interface
measurement low* W The product is below the
probe (and counterweight)
and/or outside the
measurement range. The
measurement is either not
correct or frozen.
Fill tank to at least the bottom of the
measuring range to continue
measurement.
Layer measurement
low* W When the layer is less than
50 mm (2") or below the
probe end.
Fill tank with top product to at least 50
mm (2") or fill with bottom product at
least to at least the bottom of the
measuring range to continue
measurement.