KROHNE optiplex 1300 c Скачать руководство пользователя страница 35

Страница: 35 / 95

Handbook OPTIFLEX 1300 C

35 OPTIFLEX

1300

Networks using Ex-approved devices

Special instructions

Please refer to special manuals supplied with the device if it is approved for use in potentially explosive

atmospheres.

Other means of network communication

Each OPTIFLEX is supplied ex-factory with the appropriate DTM for PACTware. The latest version is

available from the download centre on the KROHNE website. A user manual is supplied on a CD-ROM with
the device.

Commissioning

3.1

Power-on and start-up

Commissioning checklist

Check the following points before power-on and start-up:

•

are all wetted components (probe, flange and gaskets) sufficiently resistant to corrosion by the tank

product?

•

does the information on the nameplate fixed to the signal converter conform to the operating data?

•

has the device been properly installed on the tank?

•

have the electrical connections been correctly wired according to national and local rules and

regulations?

•

Ex devices: please read the special manuals delivered with the device

Start-up

The device requires less than 40 seconds to boot up once connected to the power supply. The device will

immediately display measurements of product level.

Other remarks

This level meter is set up in accordance with your order specifications. You can use the device immediately.
If further adjustments are necessary, we recommend configuration of the device using quick setup modes

provided in the DTM or via the Wizard on the optional display screen.

Refer to the DTM user manual on the CD-ROM for DTM configuration procedures.

Refer to section 4.1: Operating concept and section 4.2: Setup for advice on how to use the device display

screen Wizard.

Operation

4.1

Operating concept

4.1.1

Available user interfaces PACTware™

An Open Source, open configuration software for all field instruments that permits clear and concise display

of information and configuration of the device from a remote location. Installation is supported by a user-

friendly Wizard. Field instruments are easily integrated and the software also allows for future

developments. This is available on the CD-ROM supplied with the device or in downloadable format from
http://www.krohne.com/html/dlc/software.shtml.

Installation instructions are available on the CD-ROM.

For a presentation of PACTware, please refer to the PACTware consortium site at

http://www.pactware.de/index_en.htm.

Digital display screen (optional)

Choose from a large selection of measurement data display options.

Easy configuration via quick setup menus and linked help files (Wizard-driven).

The display screen is supplied on customer demand.

Содержание optiplex 1300 c
































































































Результаты поиска

Содержание optiplex 1300 c

Отзывы:

Похожие инструкции для optiplex 1300 c

Бренды по названию

Популярные бренды

KROHNE optiplex 1300 c, Руководство пользователя

Результаты поиска

Содержание optiplex 1300 c

Отзывы:

Похожие инструкции для optiplex 1300 c

Бренды по названию

Популярные бренды