KROHNE optiplex 1300 c Скачать руководство пользователя страница 5

Страница: 5 / 95

Handbook OPTIFLEX 1300 C

5 OPTIFLEX

1300

0.2

Safety

•

Follow all instructions carefully to make sure that you install the device correctly

•

Observe special conditions for installations requiring approved equipment.

•

Check that the information on the device nameplate conforms to the on-site data.

•

Wire according to local rules and regulations.

•

Remove the device from the installation before servicing, except for replacement of the housing as

described in section 6.2.

0.2.1

Use in hazardous areas

The device is suitable for monitoring level in hazardous areas, when fitted with the appropriate options. Install

on tanks containing all flammable substances in Gas Group IIC.

Special regulations are applicable to the use of the device in hazardous areas. Please refer to the special

manuals supplied on a CD-ROM with the device.

Please read carefully. In certain cases, these instructions will replace standard installation and operating

instructions.

0.2.2

Documentation symbols

A set of symbols is used to give warnings or information relevant to particular applications. These are defined
below:

Caution

Information that, if not followed, may lead to actions resulting in incorrect functioning of the device.

Warning

Information that, if not followed, may lead to actions resulting in measurement error, personal injury and/or

damage to the device.

Information and instructions for Ex applications

Information that must be used to observe the safety requirements for installation, operation and maintenance

in hazardous areas. If instructions are not followed, this may result in personal injury, damage to the device
and/or incorrect functioning of the device.

Содержание optiplex 1300 c
































































































Результаты поиска

Содержание optiplex 1300 c

Отзывы:

Похожие инструкции для optiplex 1300 c

Бренды по названию

Популярные бренды

KROHNE optiplex 1300 c, Руководство пользователя

Результаты поиска

Содержание optiplex 1300 c

Отзывы:

Похожие инструкции для optiplex 1300 c

Бренды по названию

Популярные бренды