Konica Minolta DRYPRO 771, Руководство по установке

Страница: 92 / 100

Ch.5 Print Commanded from the External Device and Backup
< 90 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
5.1 Print Commanded from the External Device
The procedure for connection of DRYPRO 771 power supply and network cables is described below.
1
Connect one end of the ethernet cable to the
ethernet port (RJ45) located on the rear panel of
the DRYPRO 771.
• The other end of the cable should be connected to
the facility network hub.
2
Send the print queue from the external device,
and check the print is carried out without failure.
• If any error occurs, refer to "Troubleshooting" of
the Service Manual, and remedy the problem.
• Proceed to the step-3 when the print is successful.
3
Secure the network cable with the accessory
clamps (2pcs) considering the installation space
and environment.