Konica Minolta DRYPRO 771, Руководство по установке

Страница: 78 / 100

Ch.3 Settings
< 76 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
S70 SYSTEM SETUP /.
p.55 Starting the
Service Maintenance
Mode
U80 SERVICE MODE /.
S00 DICOM SCP /.
.
.
.
.
S71 PATCH CONTROL /.
OFF
S40 FILM SETUP /.
1
Start the maintenance mode.
2
Display "U80 SERVICE MODE", and press the
[enter] key.
• "U00 DICOM SCP" will be displayed on the
message display window.
3
Press [
d
] of the [menu/select] key seven times.
• "U70 SYSTEM SETUP" will be displayed.
4
Press the [enter] key.
• Input screen will be displayed.
5
Input the value or text according to the input box
of each item.
• Use the [menu/select] key [ d ][ c ] to choose item to
be input.
• "S71 PATCH CONTROL" screen is an example for
density control ON or OFF.
6
Press the [enter] key after completing the input.
• Settings will be registered and display returned to
the maintenance menu screen.
When [exit] key is pressed in the "SYSTEM SETUP", a confirmation screen will be
displayed. Select "YES" or "NO" for the register of the changed data using [select]
key [
[ ][ \ ].
When "YES" selected : Changes to the setting (data) are registered, and the
display returns to the maintenance menu screen.
When "NO" selected : Display returns to the maintenance menu without
registering the changes to the setting (data).
Data was changed
Save the data? YES