Konica Minolta DRYPRO 771, Руководство по установке

Страница: 86 / 100

Ch.4 Checking the Image Quality
< 84 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
4.2 Test Print
After completing the density correction of the DRYPRO 771, check the printed image by implementing the
test print. At the occasion of installation, check the image by printing two flat patterns and one SMPTE
pattern.
• Flat P
attern (D=1.00)
• Flat P
attern (D=1.50)
• SMPTE Pattern
1
Install the films in the supply tray.
• Refer to the operation manual for the procedure
how to install the films.
2
Start up the service maintenance mode.
3
Bring the "U80 SERVICE MODE" onto the
screen, and press the [enter] key.
• A message "S00 DICOM SCP" will be displayed on
the screen.
U80 SERVICE MODE /.
S00 DICOM SCP /.
4
Press the lower [menu/select] key [
↓
] six times.
• A message "S60 TEST PRINT" will be displayed on
the screen.
S60 TEST PRINT /.
SMPTE PATTERN
5
Press the [select] key to select "FLAT".
6
Press the [enter] key.
• Density select screen will be displayed.
S60 TEST PRINT /.
FLAT PATTERN
S61 FLAT BASE .
[100]x0.01D
7
Input the density value using the ten key, and
press [
↓
] of the [menu/select] key once.
• Input "100" at the installation.
(100x0.01=1.00)
• Copy count select screen will be displayed.
4.2.1 Printing the Flat Pattern