Konica Minolta DRYPRO 771, Руководство по установке

Страница: 52 / 100

Ch.2 Unpacking and Installation
< 50 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
2.6.2 Loading the Film Package
After the initialization is completed, load the film package.
14x17 B S:000 Q:000.
PRESS RESET/OPEN
Shutter closing... .
Please wait...
Please set new film
and close the tray
.
1
Press the [reset/open] key.
• The message at left is displayed.
• The message indicating that the supply tray is
being unlocked is displayed.
2
Slowly pull out the supply tray fully.
3
Open the light-blocking cover on the supply tray.
4
Take the new film package out of the box and
load it into the supply tray so that the bar-code is
positioned at the front-left corner.
5
Peel off the seals from the top and bottom
edges of the package, and stretch the top and
bottom of the package.
Displayed
alternately.
The light-blocking cover
cannot be opened
unless the supply tray
has been pulled out
fully.
Do not place objects on or lean on the
supply tray when removed from the
DRYPRO 771: doing so may cause
damage.
14x17 B S:000 Q:000.
FILM EMPTY!!