Konica Minolta DRYPRO 771, Руководство по установке

Страница: 43 / 100

Ch.2 Unpacking and Installation
< 41 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
1
Replace the heat processing cover to the
original position, and secure it with four screws (TP
screws, M3x6).
•
Hold the both side, and attach the heat processing
cover as illustrated in the left.
3
Attach the cover originally attached to the front of
the heat processing cover.
•
Use one screw to secure.
2
If the drum shaft cover is separated from the
heat processing cover, attach the drum shaft
cover.
4
Attach the top cover.
•
Secure the right and left covers with two screws
each, and tighten the screw for the rear cover,
which was loosened in the procedure before.
2.4.9 Attaching the Outer Covers
Attach the outer covers after completing the removal of protective parts.