Konica Minolta DRYPRO 771, Руководство по установке

Страница: 21 / 100

Ch.1 Before Installation
< 19 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
Rear and Left Sides
5) Power Cable
3) Air Outlets
11) Ethernet Port
7) Operation Switch
6) Power Connector
1) Top Cover
2) Rear Top Cover
3) Air Outlets (5 locations)
Used to expel air used for internal
cooling.
4) Supply Tray Unlock Button
Pressing this button allows the supply
tray to be manually pulled out.
5) Power Cable
Used to connect the DRYPRO 771
power supply
6) Power Connector
The power cable is connected here.
7) Operation Switch
Activates the DRYPRO 771.
8) Left Cover
This cover may be opened to remove a
film when a jam occurs.
9) Rear Cover
10) Jam Release Cover (Elevator Trans.
Section)
To remove the film jammed at the
elevator transport section.
11) Ethernet Port
Used for network connection.
12) Serial Port
Where a backup battery is used, the
battery cable is connected here.
10) Jam Release Cover
(Elevator Trans. Section)
12) Serial Port
4) Supply Tray Unlock Button
2) Rear Top Cover
1) Top Cover
8) Left Cover
9) Rear Cover