Konica Minolta DRYPRO 771, Руководство по установке

Страница: 76 / 100

Ch.3 Settings
< 74 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
3.9 FILM SETUP Settings
The procedure for setting the output film size and type for the DRYPRO 771 is described below.
The following FILM SETUP items are available.
• S41 Film Size : Select the film size.
FILM SIZE
Select from 11x14, 14x14, 14x17.
default setting : 14x17
• S42 Film Type : Select the film type.
FILM TYPE
Select from "B"(Blue), "C"(Clear), "DRB"(DR-Blue)
default setting : B
• S43 Film Count : Set the film count from 0 ~ 126.
FILM COUNT
default setting : 126
S40 FILM SETUP /.
S40 FILM SETUP /.
1
Start up the service maintenance mode.
2
Select "U80 SERVICE MODE" and press the
[enter] key.
• The message "S00 DICOM SCP" will be displayed.
U80 SERVICE MODE /.
S00 DICOM SCP /.
3
Press the lower [menu/select] key four times.
• The message "S40 FILM SETUP" will be displayed
in the message display window.
4
Press the [enter] key.
• The setting item input screen will be displayed.
5
Input the necessary characters or digits in each of
the setting windows.
• Items for setting may be selected using the
[menu/select] key.
• The example at left shows the film size input
screen ("S41 FILM SIZE ").
6
Press the [enter] key after completing all input
and settings.
• After registering the settings, the screen returns to
the maintenance menu screen.
.
.
.
.
S41 FILM SIZE .
14x17
S40 FILM SETUP /.
p.38 Starting up the
Service
Maintenance
Mode
Service Manual
Web Maintenance
Tool>
SCP>
FILM SETUP
When [exit] key is pressed in the "FILM SETUP" of the service maintenance mode, a
confirmation screen will be displayed. Select "YES" or "NO" for the register of the
changed data using [select] key [
[
][
\
].
When "YES" selected : Changes to the setting (data) are registered, and the
display returns to the maintenance menu screen.
When "NO" selected : Display returns to the maintenance menu without
registering the changes to the setting (data).
Data was changed
Save the data? YES