Konica Minolta DRYPRO 771, Руководство по установке

Страница: 19 / 100

Ch.1 Before Installation
< 17 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
1.3.2 Checking Network
Check in advance the items below with the facility network manager.
DRYPRO 771 (SCP) Settings
•
Presence/absence of DHCP server.
(Where there is a DHCP server, the IP address for the DRYPRO 771 or maintenance PC will be
automatically allocated. Not usually used in domestic facilities.)
•
The IP address and sub-net mask for the DRYPRO 771, maintenance PC and
gateway (Where a DHCP server is not used.).
•
DRYPRO 771 host name.
•
DRYPRO 771 AE title and port number (print service).
Information Relating to Diagnostic Devices (SCU)
•
Number of diagnostic devices to be connected to the DRYPRO 771 (Max. 4ch).
•
IP addresses of diagnostic devices.
•
AE titles of diagnostic devices.
•
Port numbers of diagnostic devices (N-EVENT REPORT service).
•
Print conditions for diagnostic devices (formats, film sizes).
Maintenance PC
• PC with 10BaseT/100BaseTX network port.
• PC with TCP/IP protocol installed.
• PC that operates on Windows95/98/2000/XP.
• Supports Internet Explore (ver.5.5 or higher).
• Java applet to be installed.
Equipment for Network Connection
• Hub (used for direct connection of DRYPRO 771 with maintenance PC).
• Ethernet cable.
(For DRYPRO 771 -> hub connection and maintenance PC -> hub connection).
Tools
• Cutter
• Phillips screwdriver
• Long phillips screwdriver
(120mm (47.3inch) or more) to disengage front cover lock.
• Flathead screwdriver
• Flathead screwdriver (with edge of 4mm (0.16inch) or less) to open front cover lock
disengagement cover.
• Radio pliers
• 13mm box wrench (with a long neck) or socket wrench (with extension cover).
• Densitometer
Jigs
• DRYPRO 771 interlock killer
1.3.3 Tools and Equipment Required for Installation
Make sure that the following tools and equipment are available before proceeding with
installation.