Konica Minolta DRYPRO 771, Руководство по установке

Страница: 69 / 100

Ch.3 Settings
< 67 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
(same operation can be implemented using "web maintenance tool → SCU → USER
LUT". Using the web maintenance tool allows the operator to manipulate the LUT
while viewing it on the monitor)
U50 USER LUT .
CH 1 MRI-1
U51 USER LUT SETUP .
CH1 USER LUT 1
Library Reading.
Please wait
U52 LUT1 020-300 .
POINT01 020 X0.01D
.
.
.
U50 USER LUT .
CH 1 MRI-1
U5H LUT1 020-300 .
POINT16 020 X0.01D
(2) Manipulating the User LUTs Point by Point
While the DRYPRO 771 is furnished with a LUT library designed to match diagnostic devices, the user
may also set up custom LUTs by inputting the values for each point of LUT curve.
1
Start the maintenance mode.
2
Press [
d
] of the [menu/select] key five times.
• "U50 USER LUT" is displayed.
3
Select the channel through which the diagnostic
device is affected by the LUT, and press [enter]
key.
• Selection of the diagnostic device will be followed
by display of a message indicating that the library
is being read.
• After completing the download, "U51 USER LUT
SETUP" screen will be displayed.
4
Use the [select] key [
[
][
\
] to choose the
diagnostic device for which the LUT is to be
created.
5
Press the [enter] key.
• "POINT 1" setting screen will appear.
6
Set items "POINT1" through "POINT16."
• Use the [menu/select] key [
d
][
c
] to choose points.
• The [select] key [
[
][
\
] may be used to make
changes to set point values.
7
Press the [enter] key after completing the setting
through to "POINT 16".
• The setting is registered, and the screen returns to
the maintenance menu screen.