Konica Minolta DRYPRO 771, Руководство по установке

Страница: 42 / 100

Ch.2 Unpacking and Installation
< 40 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
Installing the Parts
How to install the parts which were removed for adjustment of the unwoven cloth is set out below.
1
While pressing the gear of the cleaning
retraction motor against the gear of the cleaner
rewind shaft, tighten the screws of the cleaning
retraction motor.
3
Tighten the five screws "a" (truss screw, M4x12)
to secure the rear cover.
Rear Cover
a
a
a
a
a
b
b
4
Tighten the two screws "b" on the bottom of the
rear cover.
2
Attach the rear cover.
5
Attach the upper rack.
•
Hold the both side of the rack and attach as
illustrated in the left.
•
Adjustment of the unwoven cloth is completed.
Proceed to the "2.4.9 Attaching the Outer Covers".