Konica Minolta DRYPRO 771, Руководство по установке

Страница: 30 / 100

Ch.2 Unpacking and Installation
< 28 >
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
6
Remove the ramp, and place it on a place where
it does not interfere with the work.
11
Set the ramp that was removed in the step
6
at
the front of the palette.
7
Remove the box containing accessories, etc.,
and then remove the shock absorbers.
8
Remove the wooden restrainer from the bottom
of the DRYPRO 771 main body.
9
Using the restrainer as a lever, raise the main
body at the front and remove the shock
absorbers (2) from under the left and right front
side.
(1)
(2)
(2)
図のように木枠裏側の凸部をパレットの端に
当てて支点にします。
Be extremely careful not
to jam fingers when
removing the shock
absorbers.
10
Again using the restrainer as a lever, raise the
main body at the rear and remove the shock
absorbers (2) from under the left and right rear
side.
the box
containing
accessories
12
Remove the clamp that is attached to the
backside of the wooden frame, and join the
ramp to the palette using the clamp.