Kikusui PLZ1004WH, Руководство пользователя

Страница: 45 / 158

PLZ-4WH
45
2
Basi
c Funct
ions
Locking the Keys
You can lock the PLZ-4WH’s keys to prevent mistaken operations such as changes to the
settings and overwriting of memory entries and sequence data.
The PLZ-4WH has two types of key locks. The factory default key lock disables most of the
keys but leaves some keys enabled. The other key lock disables all the keys.
■
Locking most of the keys
The following keys can be used even when the keys are locked.
• LOCK (SHIFT+LOCAL; locks and unlocks the keys)
• LOAD (turns the load on and off)
• A, B, and C (recall preset memory entries directly)
• A, B, and C and ENTER (used to recall preset memory entries using the safety function)
• RECALL, rotary knob, and ENTER (used to load setup memory entries)
• RUN/STOP (SHIFT+B), rotary knob (used to start and stop sequence execution)
• SHORT (SHIFT+SLEW LATE)
p. 58
From the menu, select “1. Setup” > “1. Function” > “Key Lock” > “SET-KEY.”
■
Locking all the keys
Locking all the keys disables all keys except for the LOCK (SHIFT+LOCAL) key.
p. 58
From the menu, select “1. Setup” > “1. Function” > “Key Lock” > “ALL-KEY.”
Locking and unlocking the keys
If you press LOCK (SHIFT+LOCAL) when the key icon is not displayed, the keys are locked,
and the key icon appears.
When the key icon is displayed, if you press and hold LOCK (SHIFT+LOCAL) until the PLZ-
4WH produces a beeping sound, the keys are unlocked, and the key icon disappears.
By factory default, the keys are not locked when you turn the PLZ-4WH on.
p. 58
To start the PLZ-4WH with the keys locked, from the menu, select “2. Configuration” > “1.
Power On” > “Key Lock” > “ON.” Turn the power switch off and then on again to enable the
settings.
See
See
Key icon
0.0000
A
0.00
V
0.00
W
CC
SLEWRATE
0.5000
A
132.00
mA/µs
SET
H8.25A 650V
See