Kikusui PLZ1004WH, Руководство пользователя

Страница: 51 / 158

PLZ-4WH
51
3
Ad
vanced Operat
ions
Setup Memory
You can save up to 100 setup memory entries (0 to 99). The current settings of the items
listed below are saved to the setup memory. You can add a memo of up to 15 characters in
length to each memory entry. You can recall a saved memory entry by specifying its number.
• Operation mode
• Fundamental setting values at the time the entry is saved
• Current range
• Voltage range
• Slew rate
• ABC preset memory contents
• Switching level (current/conductance or percentage)
• Switching interval (frequency and duty ratio or an amount of time)
• Protection-function-activation values
Saving settings to setup memory
1
Set the operation mode, range, and other settings to the values that you
want to save.
2
Press STORE (SHIFT+RECALL).
The STORE key blinks, and the setup memory storage screen appears. The last
memory number that an entry has been saved to appears (when the PLZ-4WH has
just been shipped, the number that appears is “0”).
3
Turn the rotary knob to select the memory number that you want to save
to.
If you select a memory number that has already been saved to, the previous settings
are overwritten.
4
To enter a memo, press the key to move the cursor.
The cursor blinks beneath “No.” You can select characters by turning the rotary knob.
Use the and keys to move the cursor. You can register up to 15 characters. Press
to move the cursor back to the memory number.
5
Press ENTER.
The STORE (SHIFT+RECALL) key lights, and the settings are saved to the setup
memory entry. If you change the settings, the key light turns off.
0.00
mA
0.000
V
0.000
W
CC
0.000
A SET
No. 1
STORE
ENTER
SLEWRATE
132.00
mA /µs
Memo entry area
H 8.25A 650V
Memo
You can cancel by
pressing PREV
(SHIFT+ ).