manualshive.com logo in svg

KaVo ProXam iOS, Инструкция по эксплуатации

Поделиться
Скачать
KaVo ProXam iOS Скачать руководство пользователя страница 95

2. Start the fitting by clicking the Fit surface models button.

The fitting takes from a few seconds to a few minutes depending on the

size of the data and how well the models fit together, etc.

3. Fine-tune the alignment by re-clicking the Fit surface models button.

The existing registration is used as a starting point.
The registrations are not stored into the database.

11.8 3D printing

11.8.1 Creating 3D printable models

Before you begin

NOTE

Check the trimming to make sure no extra data is left outside the model.

About this task

Follow these instructions to create 3D printable models.

Steps

1. Click the Generate a solid or hollowed-out model button.

NOTE

The orientation of the model defines the orientation of the base so that

the bottom of the base is orientated parallel to the occlusal surface of the

model. The height of the model also defines the height of the base.

2. Proceed as applicable:

•

To create a solid model, simply click OK in the following dialogue.

11  Analyse tab

Instructions for use

KaVo ProXam iOS 89

Содержание ProXam iOS



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды