KaVo ProXam iOS Скачать руководство пользователя страница 14

Страница: 14 / 130

WARNING

The wireless components in the scanner may be interfered with by other

equipment, even if the other equipment is fully compliant with International

Special Committee on Radio Interference (CISPR) emission requirements.

WARNING

When possible, electrical equipment should not be used when adjacent

to other electrical equipment. If adjacent use is necessary, the equipment

should be observed to verify normal operation in the configuration in which it

will be used.

CAUTION

Comply with all applicable regulations when disposing of waste materials

from the scanner. To avoid cross-contamination, dispose of all potential

biohazard waste materials in accordance with local procedures and

guidelines.

WARNING

The scanner is a high precision Class 2 laser scanning instrument. Always

store the scanner in its holder when not in use. To prevent damage or

misalignment, do not drop or strike the scanner. Follow all stated precautions

when using the scanner.

WARNING

To prevent electrical shock and eye damage by laser radiation, do not open

any sealed covers or connectors with user restricted access.

WARNING

In case of emergency unplug the scanner from the computer port and/or

unplug the computer power cord from the wall or from the computer.

WARNING

The scanner is designed to be used with the tip connected to the scanner.

The connector pins on the scanner are energised when the tip is removed.

To ensure safety of the user and patient, do not touch the pins when the tip

is removed.

CAUTION

Medical electrical equipment requires special precautions regarding

Electromagnetic Compatibility (EMC). The scanner must be installed and

placed into service according to the EMC information provided in the

documentation that accompanies the scanner.

CAUTION

Portable and mobile Radio Frequency (RF) communications equipment can

affect medical electrical equipment.

4 Safety precautions

8 KaVo ProXam iOS

Instructions for use

Содержание ProXam iOS



































































































































Результаты поиска

Содержание ProXam iOS

Отзывы:

Бренды по названию

Популярные бренды

KaVo ProXam iOS, Инструкция по эксплуатации

Результаты поиска

Содержание ProXam iOS

Отзывы:

Бренды по названию

Популярные бренды