KaVo ProXam iOS Скачать руководство пользователя страница 50

Страница: 50 / 130

Steps

1. Click Color Mode View to activate it.

2. Hover over the dentition to see a shade pop-up.

3. Left click on the desired area to make an annotation showing the colour.
4. Click on the tooth to save the shade mark in that location.

Repeat as desired.
The shade information will not export with the models. This is used as

reference only.

9.23 Scanning buccal bite

About this task

The buccal bite is scanned to align the upper and lower models. While

scanning the buccal, the system attempts to automatically align the models

and the Upper and Lower model will automatically appear in the model

build view. Ensure your other models have enough gingival data to aid in

alignment.
Follow these steps to proceed.

Steps

1. Click the Buccal Bite layer.
2. Press the articulated model down firmly or have the patient bite down

firmly and tell them not to move while you are scanning.
If they shift during scanning, the alignment may be incorrect.

9 Scanning

44 KaVo ProXam iOS

Instructions for use

Содержание ProXam iOS



































































































































Результаты поиска

Содержание ProXam iOS

Отзывы:

Бренды по названию

Популярные бренды

KaVo ProXam iOS, Инструкция по эксплуатации

Результаты поиска

Содержание ProXam iOS

Отзывы:

Бренды по названию

Популярные бренды