KaVo ProXam iOS, Инструкция по эксплуатации

Страница: 90 / 130

Results
When points have been added around the entire tooth and you click next to
the first added point, the margin is completed, and it appears in the object
browser.
To adjust the location of margin points, deselect the Margin Line tool, hold
down the Shift key while dragging a point to a desired area.
To delete a margin, check the box of the margin in the object browser and
click the trash can icon.
The default colour of the margin is red. To change the colour, click the red
square next to the margin in the object browser and select the desired colour
from the colour map.
To change the camera viewing angle, hold down the Alt key while dragging
on the model.
11.5.7 Fine-tuning measurements
About this task
If necessary, the measurement points of all types of measurement (Point-
to-point, Tooth width, Arch length, LM activator and Margin Lines) can be
fine-tuned using the Drag measurement points tool.
Follow these instructions to fine-tune measurements.
Steps
1. Select the Drag measurement points tool.
11 Analyse tab
84 KaVo ProXam iOS Instructions for use