KaVo ProXam iOS, Инструкция по эксплуатации

Страница: 69 / 130

NOTE
Path of Insertion information is not exported. This is for information
purposes only.
4. If there are multiple preparations, click the tooth number to evaluate
each prep.
5. Click the Reset icon to revert the path of insertion back to the original
angle. This icon is only available when the Path of Insertion icon is
active.
What to do next
Click Path of Insertion to deactivate it.
10.4 Editing margin
The margin is made up of control points with interconnecting lines. There are
a variety of ways to edit the margin. These can be done in any order.
•
Click and drag a control point to move it.
• Right-click on a control point and select:
•
Delete Control Point to remove a single dot.
• Delete Margin to delete the entire margin.
• Edit Margin Info to edit the tooth number.
• To add a new control point, click on the blue line. A new control point
appears.
• Click Add Segment to redraw a section of the margin.
•
Click a control point on a portion of the margin that is good. This is
your starting point.
• Click in small increments to add new points across the gap.
• Click another good point on the margin to complete the new line.
10 Margin tab
Instructions for use KaVo ProXam iOS 63