KaVo ProXam iOS, Инструкция по эксплуатации

Страница: 118 / 130

16 EMC information
Guidance and manufacturer’s declaration – electromagnetic emission
The scanner is intended for use in the electromagnetic environment
specified below. The customer or the user of the scanner should assure
that it is used in such an environment.
Emission test Compliance Electromagnetic environment -
guidance
RF emissions CISPR 11 Group 1 The scanner uses RF energy
only for its internal function.
Therefore its RF emissions
are very low and not likely
to cause any interference in
nearby electronic equipment.
RF emissions CISPR 11 Class A The scanner is suitable for use
in all establishments, other than
domestic and those directly
connected to the public low-
voltage power supply network
that supplies buildings used for
domestic purposes.
Harmonics emission IEC
61000-3-2
Not applicable
Voltage fluctuations / flicker
emissions IEC 61000-3-3
Not applicable
Guidance and manufacturer’s declaration – electromagnetic immunity
The scanner is intended for use in the electromagnetic environment
specified below. The customer or the user of the scanner should assure
that it is used in such an environment.
KaVo ProXam iOS
Immunity test IEC 60601 Test level Compliance level Electromagnetic
environment -guidance
Electrostatic discharge
(ESD) IEC 61000-4-2
+/- 8 kV Contact
+/- 15 kV Air +/- 8 kV Contact
+/- 15 kV Air Floors should be wood,
concrete or ceramic
tile. If floors are
covered with synthetic
material, the relative
humidity should be at
least 30%.
Electrical fast
transient / burst IEC
61000-4-4
+/- 2kV for power
supply lines
+/- 1kV for input/ output
lines
Not applicable Mains power quality
should be that of a
typical commercial or
hospital environment.
Surge IEC 61000-4-5 +/- 1 kV differential
mode
2 kV common mode
Not applicable Mains power quality
should be that of a
typical commercial or
hospital environment.
16 EMC information
112 KaVo ProXam iOS Instructions for use