manualshive.com logo in svg

KaVo ProXam iOS, Инструкция по эксплуатации

Поделиться
Скачать
KaVo ProXam iOS Скачать руководство пользователя страница 48

Steps

1. Click Data density.

The model refreshes with the dark blue and purple areas indicating the

least data.

2. Rotate the model to analyse it.

Dark areas on your restoration site and interproximal contact areas

should be rescanned.

3. Check if the key areas are missing data:

•

Look for coloured areas on the prepared tooth, especially on the

margin.

•

The adjacent teeth should have good data on the interproximal

contact area, occlusal surfaces, and of the lingual and buccal

contours.

•

Data below the height of contour is not as crucial on the adjacent

teeth.

Colour model with Data Density activated

4. If areas lack detail, rescan the needed area.

What to do next

Click Data Density again to return to the normal view. Click Margin when

finished with scanning.

9.19 Delete model

About this task

To delete model:

Steps

1. Click the Delete Model button to remove the model and start over.

9  Scanning

42 KaVo ProXam iOS

Instructions for use

Содержание ProXam iOS



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды