KaVo ProXam iOS, Инструкция по эксплуатации

Страница: 65 / 130

4. Zoom in and rotate the model until there is a good view of the margin.
5. Click on the margin.
A dot appears as the starting point.
6. Click along the margin in small increments.
The system creates a blue contour-following line between each click.
A hard to see margin or clicking in large increments may cause the
system to lose track of the margin edge. This can be corrected after the
margin is drawn.
7. Click the starting point to finish the margin.
The system automatically activates Path of Insertion (POI).
8. Grab any yellow dot to drag the margin line to better location.
9. You can add yellow control points to any place of the margin line by left
click.
10 Margin tab
Instructions for use KaVo ProXam iOS 59