KaVo ProXam iOS Скачать руководство пользователя страница 7

Страница: 7 / 130

1 Introduction

The KaVo ProXam iOS optical impression scanner is intended for dental

offices or laboratories. The scanner can be used as a complete optical

impression system for CAD/CAM of dental restorations in different digital

workflows in Romexis or exported to a third party.

NOTE

KaVo ProXam iOS is not indicated for any indication beyond dentistry.

This manual is valid for Romexis software revision 6.4 or later.

NOTE

The Romexis CAD/CAM module is available under license.

NOTE

Some of the screenshots may have been taken in earlier software versions

and may not exactly match your screen.

NOTE

FOR US USERS: Federal law restricts the scanner to sale by or on the order

of a health care professional.

NOTE

Throughout the manual, important notes and items of interest are formatted

like this example.

1.1 Intended use

The optical impression system is used to record the topographical

characteristics of the dentition and/or full arch and preparation areas

(including features such as implant scan locator fixtures, braces, brackets,

etc.). In addition it can record the topographical characteristics of the oral

anatomy (such as soft tissue, gingivae and palate).
The three dimensional model generated from the scan may be further

used for study models, and for the design and manufacturing of dental

restorations including implant supported prostheses and full and partial

frameworks, and can be used to design and manufacture physical models

of the teeth.
It may be used in conjunction with production of orthodontic appliances,

retainer and accessories.

1.1.1 Contraindications

The scanner is not intended for use with indications other than those

specifically mentioned.
The scanner is not intended to provide direct diagnosis or to replace

the decision of the dentist, with regard to clinical acceptability of the

manufactured restoration.

1.1.2 Clinical benefits

The use of the optical impression system:
•

reduces the need for traditional impression materials

•

facilitates treatment planning

1 Introduction

Instructions for use

KaVo ProXam iOS 1

Содержание ProXam iOS



































































































































Результаты поиска

Содержание ProXam iOS

Отзывы:

Бренды по названию

Популярные бренды

KaVo ProXam iOS, Инструкция по эксплуатации

Результаты поиска

Содержание ProXam iOS

Отзывы:

Бренды по названию

Популярные бренды