KaVo ProXam iOS Скачать руководство пользователя страница 86

Страница: 86 / 130

WARNING

Disclaimer: In case of tooth-size-discrepancy, the estimated size of the

upper and lower jaw may be different. Evaluate individually to select or

design the appropriate appliance.

TIP

You can use the Romexis Space analysis to evaluate crowding or diastemas

in the anterior region and Bolton analysis to evaluate if patient has tooth-

size-discrepancy.

WARNING

Disclaimer: Double-check that the impressions of all teeth are complete

and e.g. the distal surface of the molars or second molars is not missing.

Incomplete impressions may reduce the accuracy of estimations.

WARNING

Disclaimer: Fit the appliance on the patient and double-check that the teeth

fit correctly in the appliance. If the patient’s teeth are not guided towards

the bottom of the slots but constrained by the ridges between the slots,

treatment may not be successful. It is particularly important to check that the

LM-Activator applies desired force on the canines.

NOTE

The LM-Activator appliance is intended to be used on one patient and

then discarded. It may exceptionally be reprocessed (inspected, cleaned

and high-level disinfected or sterilised) for use on another patient in case

the appliance has been used on a same-day procedure (e.g. fitting the

appliance) under the monitoring of health care professionals. If the appliance

has been used by a patient at home, it shall not be reprocessed for use on

another patient. See "Cleaning / preventive maintenance" on page 101 for

details.

NOTE

Please refer to LM-Activator documentation for more information.

Steps

1. Click the LM-Activator tool.

11 Analyse tab

80 KaVo ProXam iOS

Instructions for use

Содержание ProXam iOS



































































































































Результаты поиска

Содержание ProXam iOS

Отзывы:

Бренды по названию

Популярные бренды

KaVo ProXam iOS, Инструкция по эксплуатации

Результаты поиска

Содержание ProXam iOS

Отзывы:

Бренды по названию

Популярные бренды