Kärcher SB MB, Руководство пользователя

Страница: 51 / 424

English 51
Changing code
For the user group Owner , the code can be changed af-
ter logging in.
1. Press the "..." button.
1
"..." menu button
2. Enter the desired code in the "EnterNew Code" win-
dow.
3. Enter the same code again for confirmation in the
"Confirm New Code" window.
Menu Wash-Program Settings
The parameters of the individual washing programs are
adjusted in the Wash-Program Settings menu.
1
Next window button
2
Change washing program button
3
Previous window button
4
Window 1 of 2
5
Washing program designation
Changing the parameters of a washing program
1. Select the window with the desired washing pro-
gram. Use the Next Window and Previous Window
buttons for this.
2. Press the Change washing program button next to
the desired wash program.
1
Change parameters button
2
Program running time for one wash value in sec-
onds
3
Water type (hot water/cold water)
4
Detergent dosing (in % of the dosing pump capaci-
ty)
5
Washing program name
6
Detergent designation
3. Press the button to change the desired parameter.
4. Press the desired parameter in the displayed selec-
tion.
Standard setting
Menu Machine
In the Machine menu, system parameters are set and
the washing station can be locked.
1
"Lock" menu button
2
"Coin value" menu button
3
"Components" menu button
Menu Components
Various system parameters can be set in this menu.
Components menu 1 of 2 (depending on the equipment
of the system, 1 or more windows are displayed)
1
Foam hose heater night mode
Activate / deactivate night mode of the foam hose
heater
Note
When the function is activated, the hose heating switch-
es off at the end of operation and is switched on again
1 hour before the start of operation.
If the function is not activated, the hose heating is also
switched on outside the operating time.
2
Hot water generator night mode
Activate / deactivate night mode of hot water gener-
ation
Note
When the function is activated, the burner switches off
at the end of operation and starts again 10 minutes be-
fore the start of operation.
If the function is not activated, the burner keeps the hot
water float tank at the set temperature even outside the
operating time.
3
Hot water temperature
Setpoint temperature of the hot water (30...60 °C)
Menu Components 2 of 2
1
Vacuum cleaner duration
Run time of a SB vacuum cleaner per washing unit
(0...480 seconds).
2
Twilight value
Limit value from which ambient brightness the light-
ing should be switched on (0...700).
Note
The currently measured brightness value is shown in
brackets.
Menu Coin value
In the Coin value menu the wash value for 100% pro-
gram run time and the coin values for the individual
channels of the coin acceptor are set.
The coin values for washing stations and vacuum clean-
ers can be set separately
1
Vacuum cleaner
Coin value Vacuum cleaner (can only be operated if
vacuum cleaners are present on the system)
Washing pro-
gram Dosing
pump water type Program
duration
High-pressure
Wash 1 (yellow) Warm 90 s
Foam Wash 1 (yellow) Cold 135 s
Rinse - Cold 105 s
Hot wax 2 (red) Warm 54 s
Insects Loosen-
ing 3 (green) Warm 75 s
Dirt Loosening 3 (green) Warm 75 s
Power foam 3 or 4 (light
green) Warm 60 s
Power rim foam 3 or 4
(white)
Cold 60 s
Top care 3 or 4 (red) Permeate 75 s
Washing pro-
gram Hydro-
minder water type Program
duration
Wheel cleaning GB 515 Cold 75 s
Intensive Foam GB 511 cold, soft
water 75 s
Washing pro-
gram Detergent dosing unit dosing
pump
500 l/h
900 l/h
% ml/min % ml/min
High-pressure
Wash 8 Approx.
6 16 Approx.
12
Foam Wash 8 Approx.
6 16 Approx.
12
Rinse - - - -
Hot wax 10 Approx.
7 20 Approx.
14
Insects Loosen-
ing 20 Approx.
14 40 about
28
Dirt Loosening 20 Approx.
14 40 Approx.
28
Power foam 30 Approx.
21 30 Approx.
21
Power rim foam 30 Approx.
21 30 Approx.
21
Top care 10 about 7 20 Approx.
14
Washing pro-
gram Detergent dosing unit hydromind-
er
500 l/h
900 l/h
% ml/min % ml/min
Wheel cleaning 2.6 39 2.6 39
Intensive Foam 1.1 26 1.1 26