Kärcher SB MB Скачать руководство пользователя страница 48

Страница: 48 / 424

English

Standard setting

1. Pull out the dosing amount adjustment knob.

Venting lever

Venting button

Dosing amount adjustment knob

2. Alternately press and release the ventilation button

while turning the adjustment knob to the desired set-
ting.

3. Release the ventilation button.
4. Press in the dosing amount adjustment knob

Setting the dry foam station

Output for water/detergent

Dosing valve for water/detergent

Input for water/detergent

Air dosing valve

Air output

Compressed air pressure gauge

Pressure reducer for air

Pressure gauge for water

Pressure reducer for water

Dry foam dosing pump

Standard setting for water

1. Open the fresh water inlet.
2. Run the wash programme Foam Wash at a washing

station.

3. Set the water pressure reducer to 0.25 MPa (2.5

bar).

Standard setting for water/chemistry

1. Set the dosing pump for dry foam to 20%. For the

procedure, see "Setting the dosing pumps".

2. Open the fresh water inlet.
3. Remove the hose at the output of the water/chemis-

try distribution block and replace it with a piece of
hose approx. 400 mm long (PVC hose 6/4).

4. Run the Foam Wash washing programme for this

washing station.

5. Adjust the fluid flow from the hose section to 300 ml/

min by adjusting the dosing valve for water/deter-
gent (measure with measuring cylinder).

6. End the currently running Foam Wash washing pro-

gramme.

7. Remove the piece of hose and reconnect the hose

to the washing station.

8. Repeat the setting of the dosing valves for water/

chemistry for the remaining washing stations.

Standard setting for air

1. Set the air pressure reducer to 0.25 MPa (2.5 bar).
2. Insert the service tool 6.901-074.0 between the air

output and the hose to the washing station.

3. Run the Foam Wash washing programme for this

washing station.

4. Adjust the air dosing valve so that the service tool

pressure gauge reads 0.15 MPa (1.5 bar).

5. End the currently running Foam Wash washing pro-

gramme.

6. Remove the service tool and reconnect the hose to

the washing station to the air distribution block.

7. Repeat the setting of the air dosing valves for the re-

maining washing stations.

Note

After the standard setting has been carried out, the con-
sistency of the foam should only be changed by adjust-
ing the air dosing valves.

Wheel cleaning/Intensive Foam set (option)

1. Pull out the detergent suction hose.

Detergent input

Nozzle insert

Detergent suction hose

2. Select the nozzle insert for the desired mixing ratio:

Standard setting for water/chemistry

1. Insert the nozzle insert into the detergent inlet as far

as it will go.

2. Fit the suction hose.
3. Adjust the pressure at the adjustment screw:

Adjustment screw

Standard setting for air

1. Set the air pressure reducer:

ATTENTION
Risk of damage

Acidic detergents can damage the system.
Only use alkaline detergents to clean the wheels.

Note

After the standard setting has been carried out, the
spray pattern should only be changed by adjusting the
air pressure reducer.
Even application of wheel cleaner is improved if a suita-
ble dye is added to the wheel cleaning concentrate.

Micro Emulsion Set (option)

1. Set the pressure as required by turning the adjust-

ment screw.

Adjustment screw

Setting the base exchanger WAT-S 202

(option)

The current time must be set at the control head of the
base exchanger in order that regeneration is carried out
at night.
1. Pull out the adjustment knob and turn it until the cur-

rent time is displayed.

Adjustment knob

Window with pointer

Washing program

Detergent

Adjustment
knob posi-
tion(%)

High-pressure Wash RM 806

Wet foam (option)

RM 806

Dry foam (option)

RM 812

Hot wax