John Bean B 2000P, Руководство оператора

Страница: 76 / 252

76
“
MANUAL MODE
”
3 4
6-11
4-12
6-10
6-11
6.1.4.1 Saving a Wheel Profi le
Up to 9 wheel profi les can be saved.
—
Clamp the wheel you wish to save the profi le of.
—
Set and acquire all the wheel data including
the number of spokes if an Alu P is required.
—
In the RIM DATA ENTRY screen select the
“SPECIAL” key (
Fig. 6-11
).
The WHEEL PROFILES screen
(Fig. 4-12)
will open.
The current wheel profi le data is highlighted in a line
on its own at the bottom of the page.
—
In the 9 position list, choose the current profi le
registration position.
—
Press the (
3, Fig. 4-12
) key to save data.
The data is now saved permanently in the chosen
position and can be recalled when required.
Note
:
If the profi le is overwritten with other data it is no longer
shown in the list.
6.1.4.2 Recalling a Wheel Profile from the
memory
—
Clamp the wheel to the balancer.
—
In the RIM DATA ENTRY screen select the
“SPECIAL” key
(Fig. 6-11)
.
The WHEEL PROFILES screen
(Fig. 4-12)
will open.
—
Type on one of the nine lines to select the
profi le indicated for the wheel on the machine.
—
Press the (
4, Fig. 4-12
) key to apply the
selection.
The ENTERING RIM DATA screen
(Fig. 6-10)
will open
and show the data recalled.
—
Check that the settings in the Indications Field
and Status Bar panel are correct.
The machine is now ready to proceed with the
measuring run.
..
_
..........