John Bean B 2000P, Руководство оператора

Страница: 164 / 252

164
“ OPTI LINE ”
6-102
6-90
1
4
5
6
Start a new Set of Wheels
After entry of WHEEL No. 5 in a Set, you can start
a new Set, without exiting the Set of Wheels mode.
Proceed as follows:
•
Perform the procedure as described for wheel
No. 1.
The machine deletes the data relative to the previ-
ous wheels and shows the current wheel as the first
wheel in a new Set.
After entry of WHEEL No. 4 in a Set you can start
a new Set, without exiting the Set of Wheels mode.
Proceed as follows:
•
Mount the wheel on the balancer shaft.
•
Perform the run.
•
Complete any normal correction and
balancing operations required.
•
Remove the wheel from the balancer.
•
Access the “Set of Wheels” screen (
1, Fig.
6-90
).
Wheel number 5 is shown on the screen page (
Fig.
6-102
).
•
Select key
4
.
The machine deletes the data relative to the previ-
ous wheels and shows the last wheel as wheel
number 1, starting a new Set of Wheels.
Terminate and exit procedure
To exit the Set of Wheels procedure and return to
the OPTIMA ENTRY screen page.
•
Press key
5
(
Fig. 6-102
).
All data relative to the Set of Wheels is deleted.
..
_
..........