Janome Digitizer MB, Инструкция

Страница: 63 / 306

JANOME Embroidery Software Instruction Book
Chapter 8 Manual Digitizing
61
Use the Parallel Fill tools to digitize large and
complex shapes generally with fixed rather than
turning stitch angles . Most shapes can be digitized
with these tools. See also Creating motif fills .
To create Parallel Fill objects
1 Click a Parallel Fill icon.
2 Digitize the boundary of the shape, by marking
reference points around the outline of the shape.
Š
Click to enter corner points.
Š
Right-click to enter curve points.
Try this! Follow the prompts in the status bar to help
you digitize. If you make a mistake, press Backspace
to delete the last reference point, then continue
digitizing.
3 Close the shape.
Š
To close the shape with the same type of reference
point as the last you digitized – i.e. corner or curve –
simply press
Enter .
Š
To close the shape using a different type of reference
point, mark the last on top of the first and press
Enter .
Note Boundaries must not overlap.
4 Press Enter .
Note To adjust stitch angles in Parallel Fill objects, see
Adjusting stitch angles .
Digitizing circles
Digitize circles and ovals with a
few clicks. You can use any fill
stitch type with circles and ovals.
To digitize circles and ovals
1 Choose a Parallel Fill: Circle
method from the Digitize toolbar.
Use Digitize > Parallel Radial Fill to digitize
closed shapes with Radial fills.
Use Digitize > Parallel Satin Fill: Circle to digitize
circles in Satin fill.
Use Digitize > Parallel Weave Fill: Circle to
digitize circles in Weave fill.
Use Digitize > Parallel Embossed Fill: Circle to
digitize circles in Embossed fill.
Use Digitize > Parallel Contour Fill: Circle to
digitize circles in Contour fill.
Use Digitize > Parallel Radial Fill: Circle to
digitize circles in Radial fill.
1
2
4
7
10
6
5
12
11
8
9
3
Object is closed
automatically
cu
rv
e
1
2
4
7
10
6
13
5
12
11
8
9
3
Last point is marked on top of first
with left button
st
ra
ig
ht
lin
e