Goodrive300-01 inverter for air compressor Function parameters
-47-
Function
code
Name
Detailed instruction of parameters
Default
value
Modif
y
parameter menu. Only correct password can make
the user check or modify the parameters. Please
remember all user passwords.
Retreat the editing state of the function codes and
the password protection will become valid in a
minute. If the valid password is available, press
PRG/ESC to enter into the editing state of the
function codes, and then
“0.0.0.0.0” will be
displayed. The operator cannot enter into it unless
inputting the right password.
Note: Restoring to the default value can clear the
password, please use it with caution.
P07.01
Parameter copy
The function code determines the manner of
parameters copy.
0: No operation
1: Upload the local function parameter to the keypad
2: Download the keypad function parameter to local
address (including the motor parameters)
3: Download the keypad function parameter to local
address (excluding the motor parameter of P02 and
P12 group)
4: Download the keypad function parameters to local
address (only for the motor parameter of P02 and
P12 group)
Note: After completing the 1~4 operations, the
parameter will restore to 0 automatically; the function
of upload and download excludes the factory
parameters of P29.
0
◎
P07.02
QUICK/JOG
function selection
0: No function
1: Jogging. Press QUICK/JOG to begin the jogging
running.
2: Shift the display state by the shifting key. Press
QUICK/JOG to shift the displayed function code
from right to left.
3: Shift between forward rotation and reverse
rotation. Press QUICK/JOG to shift the direction of
the frequency commands. This function is only valid
in the keypad command channels.
4: Clear UP/DOWN settings. Press QUICK/JOG to
1
◎
