InfoPrint Color 1826 Скачать руководство пользователя

Страница: 43 / 238

Grasp the extension, and pull it straight out until it is fully extended.

Prepare the paper for loading.

•

Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper.

Straighten the edges on a level surface.

•

Hold transparencies by the edges and fan them. Straighten the edges on a level surface.

Note: Avoid touching the print side of transparencies. Be careful not to scratch them.

•

Flex a stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level

surface.

Locate the stack height limiter and tab.

Note: Do not exceed the maximum stack height by forcing paper under the stack height limiter.

Tab

Stack height limiter

Loading paper and specialty media

Содержание Color 1826















































































































































































































































Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды

InfoPrint Color 1826, Руководство пользователя

Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды